AS-2024US-TRT
2U Ultra AMD DP Server. 12 hot-swap 3.5" Drive Bays
- Dual AMD EPYC™ 7003/7002 Series Processors (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
- 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs
- Expansion slots: 2 PCI-E 4.0 x16 (FH, 10.5" L) slots, 1 PCI-E 4.0 x16 (FH, 9.5" L) slot, 1 PCI-E 4.0 x16 (LP) slot, 1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot, 1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot
- Integrated IPMI 2.0 + KVM with dedicated LAN, Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- Dual 10GBase-T LAN ports via Intel® X710-AT2
- 12 hot-swap 3.5" Drive Bays: 12 SATA3 by default or 8 SATA3 + 4 NVMe via optional tray or 12 SAS3 via optional SAS kit
- 1600W Redundant Power Supplies
- Titanium Level (96%+)
Product Specification
| Product SKU | |
| AS -2024US-TRT | A+ Server 2024US-TRT |
| Motherboard | H12DSU-iN |
| Processor/Chipset | |
| CPU | Dual AMD EPYC™ 7003/7002 Series Processors (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) Socket SP3 Supports CPU TDP up to 280W* |
| Cores | Up to 64 Cores |
| Chipset | System on Chip (SoC) |
| Note | * Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. |
| System Memory | |
| Memory Capacity | 32 DIMM slots Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM 8-channel memory bus |
| Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs |
| DIMM Sizes | 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| SATA | SATA3 (6 Gbps) |
| Graphics | ASPEED AST2500 BMC |
| Expansion Slots | |
| 2U | 2 PCI-E 4.0 x16 (FH, 10.5" L) slots 1 PCI-E 4.0 x16 (FH, 9.5" L) slot 1 PCI-E 4.0 x16 (LP) slot 1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot 1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. ) |
| Input / Output | |
| SATA | 12 SATA3 (6 Gbps) ports |
| LAN | Dual 10GBase-T LAN ports via Intel® X710-AT2 1 RJ45 Dedicated IPMI LAN port |
| USB | 4 USB 3.0 ports (1 front + 2 rear + 1 Type A) |
| VGA | 1 VGA port |
| SAS | 12 SAS3 ports support via optional SAS kit |
| NVMe | 4 NVMe support via optional tray |
| Others | 1 COM port (rear) 2 SATA DOM power connector TPM 1.2 header |
| System BIOS | |
| BIOS Type | AMI 128Mb SPI Flash EEPROM |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1 |
| Chassis | |
| Form Factor | 2U |
| Model | CSE-829U2TS-R1K62P3-T |
| Dimensions | |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 28.46" (723mm) |
| Weight | Net Weight: 36 lbs (16.4 kg) Gross Weight: 72 lbs (32.7 kg) |
| Front Panel | |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED /UID LED |
| Drive Bays | |
| Hot-swap | 12 hot-swap 3.5" Drive Bays: 12 SATA3 by default or 8 SATA3 + 4 NVMe via optional kit or 12 SAS3 via optional SAS kit |
| Backplane | |
| HDD Backplane | Supports 12 SATA3 or 8 SATA3 + 4 NVMe or 12 SAS3 HDD |
| System Cooling | |
| Fans | 4 heavy-duty PWM fans with optimal fan speed control |
| Power Supply | |
| 1600W Redundant Power Supplies with PMBus | 1600W/1000W |
| Dimension (W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 13 - 9A / 50-60Hz 200-240Vac / 10 - 8A / 50-60Hz |
| +12V | Max: 83.3A / Min: 0A (100-127Vac) Max: 133A / Min: 0A (200-240Vac) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level |
| PC Health Monitoring | |
| CPU | Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator |
| FAN | Up to 8-fan status tachometer monitoring Up to eight 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 8x Fan connectors I²C Temperature Sensing Logic |
| LED | CPU / System Overheat LED |
| Other Features | Chassis Intrusion Detection Chassis Intrusion Header |
| Operating Environment / Compliance | |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C Non-operating Temperature: -40°C to 70°C Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Ultra Systems Industry Leading IOPS, Energy Efficiency, and Flexibility
Supermicro® A+ Ultra system are designed to deliver the highest performance, flexibility, scalability and serviceability to demanding IT environments, and to power mission-critical Enterprise workloads, including support for dual AMD EPYC™ 7003/7002 Series Processors* and 32 DIMMs of DDR4-3200MHz memory for up to 8TB of capacity.
- Uncompromised performance design with 2 CPU sockets and 32 DIMMs optimized for supporting the highest processor TDPs
- Best-in-class server features including all NVMe, hybrid storage and low latency optimizations
- Vast networking and expansion possibilities with Ultra Riser cards
Leading Multi-node Architecture with Front or Rear I/O
HIGHEST PERFORMANCE A+ ULTRA SERVERS
- Optimized for highest processor TDPs
- Up to 24x Hybrid NVMe/SAS/SATA drive bays
- Up to 3 double width GPUs
- Applications: Enterprise Server , Hyperconverged Storage , Virtualization , Cloud Computing , CDN
AS-1024US-TRT 1U Dual-Processor Server, 32 DIMMs
4x hot-swap 3.5" SATA/NVMe drives
AS-2024US-TRT 2U Dual-Processor Server 32 DIMMs
12x hot-swap 3.5" SATA/NVMe drives